some stuff I have and want to bring to TAMI

Discussion:

Gal Bazel

2014-10-08 01:42:09 UTC

Some stuff I have and maybe can be used at TAMI
Please let me know what is needed/wanted
and what not to bring.

Linear rails about 30-40 mm, a bit large for it's length.
I can give 2-3 units.

<Loading Image...

>

DC motor driver
<Loading Image...

>

Step motor with driver

<Loading Image...

>

2 cameras, no lenses
<Loading Image...

>

old KVM units, a few units
<Loading Image...

>

small momvent range linear rails
<Loading Image...

>

a few units of 50mm encoder brackets
<Loading Image...

>

ecostic ceiling panels,
about 30-40
can be used for closing a part of the ceiling
at TAMI to lower the AC consumption
<Loading Image...

>

an on wall work staition
with room for a small keyboard, mouse pad and a monitor.
all the cables are going in the panels.
<Loading Image...

>
24V - 10 Amp power supply.
may be more then one in the future.
<Loading Image...

>

some small air units
<Loading Image...

>

I really don't know how these are called but I have a few units
that I don't have, and reciving more all the time.
8mm thickness with 8mm holes.
<Loading Image...

>

2 sets of shelves

<Loading Image...

--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××××¢× ×× ×××××× ×©××ª× ×× ×× ××§×××Š× 'TAMI' ××§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ×× hasadna+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
××× ××€×š×¡× ××××¢××ª ××§×××Š× ××, ×©×× ×××"× ×-hasadna-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
×××€×©×š××××ª × ××¡×€××ª ××§×š ×-https://groups.google.com/d/optout.

Ronen Shouker

2014-10-08 01:48:27 UTC

Permalink

What are those air units do?

Post by Gal Bazel
Some stuff I have and maybe can be used at TAMI
Please let me know what is needed/wanted
and what not to bring.
Linear rails about 30-40 mm, a bit large for it's length.
I can give 2-3 units.
<https://lh4.googleusercontent.com/-tzwm_5g6oe0/VDSR4ka1QUI/AAAAAAAAAEk/PVmfS8tbySU/s1600/2014-10-01%2B15.55.12.jpg>
DC motor driver
<https://lh6.googleusercontent.com/-02R9Ygl1WoU/VDSR8rDfWTI/AAAAAAAAAEs/eE0FPAoAlRU/s1600/2014-10-01%2B15.55.43.jpg>
Step motor with driver
<https://lh3.googleusercontent.com/-JsIF4roYa3w/VDSSBWhtQOI/AAAAAAAAAE0/Wx3-XBI7xyc/s1600/2014-10-01%2B15.56.34.jpg>
2 cameras, no lenses
<https://lh3.googleusercontent.com/-ixcTuVJttTc/VDSSGAzi7cI/AAAAAAAAAE8/JCUk4dB3QOY/s1600/2014-10-01%2B15.58.27.jpg>
old KVM units, a few units
<https://lh4.googleusercontent.com/-RLPSW20BI5E/VDSSKGGXdKI/AAAAAAAAAFE/lzJ1pjSNsn0/s1600/2014-10-01%2B15.59.03.jpg>
small momvent range linear rails
<https://lh5.googleusercontent.com/-xp6VFzQ6_Jw/VDSSQ22hrvI/AAAAAAAAAFM/gtOODyUr1x8/s1600/2014-10-01%2B15.59.33.jpg>
a few units of 50mm encoder brackets
<https://lh6.googleusercontent.com/-_pDlWabIyEM/VDSSVWGcrkI/AAAAAAAAAFU/mkTLhjT5zMA/s1600/2014-10-01%2B16.00.14.jpg>
ecostic ceiling panels,
about 30-40
can be used for closing a part of the ceiling
at TAMI to lower the AC consumption
<https://lh5.googleusercontent.com/-rcIdwdgMZ8M/VDSSec7DfKI/AAAAAAAAAFk/V1MRwRJMCxk/s1600/2014-10-01%2B16.01.33.jpg>
an on wall work staition
with room for a small keyboard, mouse pad and a monitor.
all the cables are going in the panels.
<https://lh5.googleusercontent.com/-4csdor0aVX8/VDSSiIoQKNI/AAAAAAAAAFs/dCG7PzDBYcE/s1600/2014-10-01%2B16.05.36.jpg>
24V - 10 Amp power supply.
may be more then one in the future.
<https://lh5.googleusercontent.com/-jh4crWc4sYA/VDSSZ3mZw7I/AAAAAAAAAFc/Qu1t13KJdzs/s1600/2014-10-01%2B16.00.43.jpg>
some small air units
<https://lh6.googleusercontent.com/-CK4fdueeXRQ/VDSR033W64I/AAAAAAAAAEc/4HXTRYHV9-A/s1600/2014-10-01%2B15.54.38.jpg>
I really don't know how these are called but I have a few units
that I don't have, and reciving more all the time.
8mm thickness with 8mm holes.
<https://lh4.googleusercontent.com/-Nde67gV9Zj4/VDSRwqbp25I/AAAAAAAAAEU/yr46K10CYjY/s1600/2014-10-01%2B15.53.57.jpg>
2 sets of shelves
<https://lh3.googleusercontent.com/-MXI26YPE4JE/VDSRrhP4uOI/AAAAAAAAAEM/5QK71C8nByU/s1600/2014-10-01%2B15.52.45.jpg>
--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××ª ×××××¢× ××× ××€× × ×©××ª× ×š×©×× ××§×××Š× 'TAMI' ×©× ×§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ××
×××€×©×š××××ª × ××¡×€××ª, ××§×š ×-https://groups.google.com/d/optout.

Gal Bazel

2014-10-08 02:07:11 UTC

Permalink

small air valves
which I had taken off some old High-tec machines I had bought a few years
ago.

Post by Ronen Shouker
What are those air units do?

Ronen Shouker

2014-10-08 02:25:32 UTC

Permalink

Regarding the air valves, I might be interested. Are they easily
controlled?
Also many of the other stuff seems very useful, but I'll let the people
with greater understanding than me decide :)

Post by Gal Bazel
small air valves
which I had taken off some old High-tec machines I had bought a few years
ago.

Post by Ronen Shouker
What are those air units do?

Gal Bazel

2014-10-08 02:30:58 UTC

Permalink

What you can see in the picture is a bit of mess,
on the left side of the picture there are sensors (If I am not mistaken)
in the middle are the silent pressure release and on the right side
there is a main block with a few 24V (I think) valves,
power on, the valve open
power off the valve closes.

or maybe the other way, I am not sure, never used them more then swaping
them with old one on some machines I fix
and the last time I did that was about 3-4 years ago so I don't really
remember.

Post by Ronen Shouker
Regarding the air valves, I might be interested. Are they easily
controlled?
Also many of the other stuff seems very useful, but I'll let the people
with greater understanding than me decide :)

Post by Gal Bazel
small air valves
which I had taken off some old High-tec machines I had bought a few years
ago.

Post by Ronen Shouker
What are those air units do?

Ronen Shouker

2014-10-08 02:34:47 UTC

Permalink

In that case the 24V power supply will come handy too :)

Post by Gal Bazel
What you can see in the picture is a bit of mess,
on the left side of the picture there are sensors (If I am not mistaken)
in the middle are the silent pressure release and on the right side
there is a main block with a few 24V (I think) valves,
power on, the valve open
power off the valve closes.
or maybe the other way, I am not sure, never used them more then swaping
them with old one on some machines I fix
and the last time I did that was about 3-4 years ago so I don't really
remember.

Post by Gal Bazel
which I had taken off some old High-tec machines I had bought a few
years ago.

Post by Ronen Shouker
What are those air units do?

Post by Gal Bazel
Some stuff I have and maybe can be used at TAMI
Please let me know what is needed/wanted
and what not to bring.
Linear rails about 30-40 mm, a bit large for it's length.
I can give 2-3 units.
<https://lh4.googleusercontent.com/-tzwm_5g6oe0/VDSR4ka1QUI/AAAAAAAAAEk/PVmfS8tbySU/s1600/2014-10-01%2B15.55.12.jpg>
DC motor driver
<https://lh6.googleusercontent.com/-02R9Ygl1WoU/VDSR8rDfWTI/AAAAAAAAAEs/eE0FPAoAlRU/s1600/2014-10-01%2B15.55.43.jpg>
Step motor with driver
<https://lh3.googleusercontent.com/-JsIF4roYa3w/VDSSBWhtQOI/AAAAAAAAAE0/Wx3-XBI7xyc/s1600/2014-10-01%2B15.56.34.jpg>
2 cameras, no lenses
<https://lh3.googleusercontent.com/-ixcTuVJttTc/VDSSGAzi7cI/AAAAAAAAAE8/JCUk4dB3QOY/s1600/2014-10-01%2B15.58.27.jpg>
old KVM units, a few units
<https://lh4.googleusercontent.com/-RLPSW20BI5E/VDSSKGGXdKI/AAAAAAAAAFE/lzJ1pjSNsn0/s1600/2014-10-01%2B15.59.03.jpg>
small momvent range linear rails
<https://lh5.googleusercontent.com/-xp6VFzQ6_Jw/VDSSQ22hrvI/AAAAAAAAAFM/gtOODyUr1x8/s1600/2014-10-01%2B15.59.33.jpg>
a few units of 50mm encoder brackets
<https://lh6.googleusercontent.com/-_pDlWabIyEM/VDSSVWGcrkI/AAAAAAAAAFU/mkTLhjT5zMA/s1600/2014-10-01%2B16.00.14.jpg>
ecostic ceiling panels,
about 30-40
can be used for closing a part of the ceiling
at TAMI to lower the AC consumption
<https://lh5.googleusercontent.com/-rcIdwdgMZ8M/VDSSec7DfKI/AAAAAAAAAFk/V1MRwRJMCxk/s1600/2014-10-01%2B16.01.33.jpg>
an on wall work staition
with room for a small keyboard, mouse pad and a monitor.
all the cables are going in the panels.
<https://lh5.googleusercontent.com/-4csdor0aVX8/VDSSiIoQKNI/AAAAAAAAAFs/dCG7PzDBYcE/s1600/2014-10-01%2B16.05.36.jpg>
24V - 10 Amp power supply.
may be more then one in the future.
<https://lh5.googleusercontent.com/-jh4crWc4sYA/VDSSZ3mZw7I/AAAAAAAAAFc/Qu1t13KJdzs/s1600/2014-10-01%2B16.00.43.jpg>
some small air units
<https://lh6.googleusercontent.com/-CK4fdueeXRQ/VDSR033W64I/AAAAAAAAAEc/4HXTRYHV9-A/s1600/2014-10-01%2B15.54.38.jpg>
I really don't know how these are called but I have a few units
that I don't have, and reciving more all the time.
8mm thickness with 8mm holes.
<https://lh4.googleusercontent.com/-Nde67gV9Zj4/VDSRwqbp25I/AAAAAAAAAEU/yr46K10CYjY/s1600/2014-10-01%2B15.53.57.jpg>
2 sets of shelves
<https://lh3.googleusercontent.com/-MXI26YPE4JE/VDSRrhP4uOI/AAAAAAAAAEM/5QK71C8nByU/s1600/2014-10-01%2B15.52.45.jpg>
--
archive and web access >https://groups.google.com/for
um/#!forum/hasadna
---
â×§××××ª ××ª ×××××¢× ××× ××€× × ×©××ª× ×š×©×× ××§×××Š× 'TAMI' ×©× ×§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ××
×××€×©×š××××ª × ××¡×€××ª, ××§×š ×-https://groups.google.com/d/optout.

--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××ª ×××××¢× ××× ××€× × ×©××ª× ×š×©×× ××§×××Š× 'TAMI' ×©× ×§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ××
×××€×©×š××××ª × ××¡×€××ª, ××§×š ×-https://groups.google.com/d/optout.

--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××××¢× ×× ×××××× ×©××ª× ×× ×× ××§×××Š× 'TAMI' ××§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ×× hasadna+***@googlegroups.com.
××× ××€×š×¡× ××××¢××ª ××§×××Š× ××, ×©×× ×××"× ×-***@googlegroups.com.
×××€×©×š××××ª × ××¡×€××ª ××§×š ×-https://groups.google.com/d/optout.

Guy Ovadia

2014-10-08 02:35:00 UTC

Permalink

I think it's all very good and useful stuff and I'm in favor that you bring
it in. I'd like to emphasize that in my experience, the key to bringing
stuff to TAMI and making it actually useful is labeling it well and storing
it in appropriate places. because of the distributed nature of how TAMI
works, if this is not done then stuff rapidly transforms from "a useful
item with a specific, known purpose" to "random junk".

mark all the electronics stuff as "working" or something to that effect
(that is, assuming you know they are working). everything which is not
obvious in purpose should be labeled with a few words of description, i.e.
as you did above the photos.

p.s. the ceiling tiles take a lot of space, so I don't suggest bringing it
unless people have an immediate construction project in mind for it.
personally, I think a lot of the charm of the physical space of TAMI is,
well, the space. I don't support installing a second ceiling and lowering
the effective ceiling height even if it will save a bit on a/c.

Post by Gal Bazel
small air valves
which I had taken off some old High-tec machines I had bought a few years
ago.

Post by Ronen Shouker
What are those air units do?

archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××ª ×××××¢× ××× ××€× × ×©××ª× ×š×©×× ××§×××Š× 'TAMI' ×©× ×§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ××
×××€×©×š××××ª × ××¡×€××ª, ××§×š ×-https://groups.google.com/d/optout.
--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××ª ×××××¢× ××× ××€× × ×©××ª× ×š×©×× ××§×××Š× 'TAMI' ×©× ×§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ××
×××€×©×š××××ª × ××¡×€××ª, ××§×š ×-https://groups.google.com/d/optout.

Gal Bazel

2014-10-08 02:45:08 UTC

Permalink

Cool,

I will need someone's help with putting everything in place since I don't
really know where every thing goes.

Post by Guy Ovadia
I think it's all very good and useful stuff and I'm in favor that you
bring it in. I'd like to emphasize that in my experience, the key to
bringing stuff to TAMI and making it actually useful is labeling it well
and storing it in appropriate places. because of the distributed nature of
how TAMI works, if this is not done then stuff rapidly transforms from "a
useful item with a specific, known purpose" to "random junk".
mark all the electronics stuff as "working" or something to that effect
(that is, assuming you know they are working). everything which is not
obvious in purpose should be labeled with a few words of description, i.e.
as you did above the photos.
p.s. the ceiling tiles take a lot of space, so I don't suggest bringing it
unless people have an immediate construction project in mind for it.
personally, I think a lot of the charm of the physical space of TAMI is,
well, the space. I don't support installing a second ceiling and lowering
the effective ceiling height even if it will save a bit on a/c.

Post by Gal Bazel
small air valves
which I had taken off some old High-tec machines I had bought a few
years ago.

Post by Ronen Shouker
What are those air units do?

Post by Gal Bazel
Some stuff I have and maybe can be used at TAMI
Please let me know what is needed/wanted
and what not to bring.
Linear rails about 30-40 mm, a bit large for it's length.
I can give 2-3 units.
<https://lh4.googleusercontent.com/-tzwm_5g6oe0/VDSR4ka1QUI/AAAAAAAAAEk/PVmfS8tbySU/s1600/2014-10-01%2B15.55.12.jpg>
DC motor driver
<https://lh6.googleusercontent.com/-02R9Ygl1WoU/VDSR8rDfWTI/AAAAAAAAAEs/eE0FPAoAlRU/s1600/2014-10-01%2B15.55.43.jpg>
Step motor with driver
<https://lh3.googleusercontent.com/-JsIF4roYa3w/VDSSBWhtQOI/AAAAAAAAAE0/Wx3-XBI7xyc/s1600/2014-10-01%2B15.56.34.jpg>
2 cameras, no lenses
<https://lh3.googleusercontent.com/-ixcTuVJttTc/VDSSGAzi7cI/AAAAAAAAAE8/JCUk4dB3QOY/s1600/2014-10-01%2B15.58.27.jpg>
old KVM units, a few units
<https://lh4.googleusercontent.com/-RLPSW20BI5E/VDSSKGGXdKI/AAAAAAAAAFE/lzJ1pjSNsn0/s1600/2014-10-01%2B15.59.03.jpg>
small momvent range linear rails
<https://lh5.googleusercontent.com/-xp6VFzQ6_Jw/VDSSQ22hrvI/AAAAAAAAAFM/gtOODyUr1x8/s1600/2014-10-01%2B15.59.33.jpg>
a few units of 50mm encoder brackets
<https://lh6.googleusercontent.com/-_pDlWabIyEM/VDSSVWGcrkI/AAAAAAAAAFU/mkTLhjT5zMA/s1600/2014-10-01%2B16.00.14.jpg>
ecostic ceiling panels,
about 30-40
can be used for closing a part of the ceiling
at TAMI to lower the AC consumption
<https://lh5.googleusercontent.com/-rcIdwdgMZ8M/VDSSec7DfKI/AAAAAAAAAFk/V1MRwRJMCxk/s1600/2014-10-01%2B16.01.33.jpg>
an on wall work staition
with room for a small keyboard, mouse pad and a monitor.
all the cables are going in the panels.
<https://lh5.googleusercontent.com/-4csdor0aVX8/VDSSiIoQKNI/AAAAAAAAAFs/dCG7PzDBYcE/s1600/2014-10-01%2B16.05.36.jpg>
24V - 10 Amp power supply.
may be more then one in the future.
<https://lh5.googleusercontent.com/-jh4crWc4sYA/VDSSZ3mZw7I/AAAAAAAAAFc/Qu1t13KJdzs/s1600/2014-10-01%2B16.00.43.jpg>
some small air units
<https://lh6.googleusercontent.com/-CK4fdueeXRQ/VDSR033W64I/AAAAAAAAAEc/4HXTRYHV9-A/s1600/2014-10-01%2B15.54.38.jpg>
I really don't know how these are called but I have a few units
that I don't have, and reciving more all the time.
8mm thickness with 8mm holes.
<https://lh4.googleusercontent.com/-Nde67gV9Zj4/VDSRwqbp25I/AAAAAAAAAEU/yr46K10CYjY/s1600/2014-10-01%2B15.53.57.jpg>
2 sets of shelves
<https://lh3.googleusercontent.com/-MXI26YPE4JE/VDSRrhP4uOI/AAAAAAAAAEM/5QK71C8nByU/s1600/2014-10-01%2B15.52.45.jpg>
--
archive and web access >https://groups.google.com/
forum/#!forum/hasadna
---
â×§××××ª ××ª ×××××¢× ××× ××€× × ×©××ª× ×š×©×× ××§×××Š× 'TAMI' ×©× ×§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ××
×××€×©×š××××ª × ××¡×€××ª, ××§×š ×-https://groups.google.com/d/optout.

Udi Finkelstein

2014-10-08 04:37:49 UTC

Permalink

Gal, I could really make use of one 24V power supply.

thanks,
Udi
n.b. the digital load (Re:load Pro) I bought for TAMI is on its way in the
royal mail. we'll see how long it takes for it to get to me with all these
mail strikes.

Post by Gal Bazel
Cool,
I will need someone's help with putting everything in place since I don't
really know where every thing goes.

Post by Guy Ovadia
I think it's all very good and useful stuff and I'm in favor that you
bring it in. I'd like to emphasize that in my experience, the key to
bringing stuff to TAMI and making it actually useful is labeling it well
and storing it in appropriate places. because of the distributed nature of
how TAMI works, if this is not done then stuff rapidly transforms from "a
useful item with a specific, known purpose" to "random junk".
mark all the electronics stuff as "working" or something to that effect
(that is, assuming you know they are working). everything which is not
obvious in purpose should be labeled with a few words of description, i.e.
as you did above the photos.
p.s. the ceiling tiles take a lot of space, so I don't suggest bringing
it unless people have an immediate construction project in mind for it.
personally, I think a lot of the charm of the physical space of TAMI is,
well, the space. I don't support installing a second ceiling and lowering
the effective ceiling height even if it will save a bit on a/c.

Post by Gal Bazel
small air valves
which I had taken off some old High-tec machines I had bought a few
years ago.

Post by Ronen Shouker
What are those air units do?

Post by Gal Bazel
Some stuff I have and maybe can be used at TAMI
Please let me know what is needed/wanted
and what not to bring.
Linear rails about 30-40 mm, a bit large for it's length.
I can give 2-3 units.
<https://lh4.googleusercontent.com/-tzwm_5g6oe0/VDSR4ka1QUI/AAAAAAAAAEk/PVmfS8tbySU/s1600/2014-10-01%2B15.55.12.jpg>
DC motor driver
<https://lh6.googleusercontent.com/-02R9Ygl1WoU/VDSR8rDfWTI/AAAAAAAAAEs/eE0FPAoAlRU/s1600/2014-10-01%2B15.55.43.jpg>
Step motor with driver
<https://lh3.googleusercontent.com/-JsIF4roYa3w/VDSSBWhtQOI/AAAAAAAAAE0/Wx3-XBI7xyc/s1600/2014-10-01%2B15.56.34.jpg>
2 cameras, no lenses
<https://lh3.googleusercontent.com/-ixcTuVJttTc/VDSSGAzi7cI/AAAAAAAAAE8/JCUk4dB3QOY/s1600/2014-10-01%2B15.58.27.jpg>
old KVM units, a few units
<https://lh4.googleusercontent.com/-RLPSW20BI5E/VDSSKGGXdKI/AAAAAAAAAFE/lzJ1pjSNsn0/s1600/2014-10-01%2B15.59.03.jpg>
small momvent range linear rails
<https://lh5.googleusercontent.com/-xp6VFzQ6_Jw/VDSSQ22hrvI/AAAAAAAAAFM/gtOODyUr1x8/s1600/2014-10-01%2B15.59.33.jpg>
a few units of 50mm encoder brackets
<https://lh6.googleusercontent.com/-_pDlWabIyEM/VDSSVWGcrkI/AAAAAAAAAFU/mkTLhjT5zMA/s1600/2014-10-01%2B16.00.14.jpg>
ecostic ceiling panels,
about 30-40
can be used for closing a part of the ceiling
at TAMI to lower the AC consumption
<https://lh5.googleusercontent.com/-rcIdwdgMZ8M/VDSSec7DfKI/AAAAAAAAAFk/V1MRwRJMCxk/s1600/2014-10-01%2B16.01.33.jpg>
an on wall work staition
with room for a small keyboard, mouse pad and a monitor.
all the cables are going in the panels.
<https://lh5.googleusercontent.com/-4csdor0aVX8/VDSSiIoQKNI/AAAAAAAAAFs/dCG7PzDBYcE/s1600/2014-10-01%2B16.05.36.jpg>
24V - 10 Amp power supply.
may be more then one in the future.
<https://lh5.googleusercontent.com/-jh4crWc4sYA/VDSSZ3mZw7I/AAAAAAAAAFc/Qu1t13KJdzs/s1600/2014-10-01%2B16.00.43.jpg>
some small air units
<https://lh6.googleusercontent.com/-CK4fdueeXRQ/VDSR033W64I/AAAAAAAAAEc/4HXTRYHV9-A/s1600/2014-10-01%2B15.54.38.jpg>
I really don't know how these are called but I have a few units
that I don't have, and reciving more all the time.
8mm thickness with 8mm holes.
<https://lh4.googleusercontent.com/-Nde67gV9Zj4/VDSRwqbp25I/AAAAAAAAAEU/yr46K10CYjY/s1600/2014-10-01%2B15.53.57.jpg>
2 sets of shelves
<https://lh3.googleusercontent.com/-MXI26YPE4JE/VDSRrhP4uOI/AAAAAAAAAEM/5QK71C8nByU/s1600/2014-10-01%2B15.52.45.jpg>
--
archive and web access >https://groups.google.com/for
um/#!forum/hasadna
---
â×§××××ª ××ª ×××××¢× ××× ××€× × ×©××ª× ×š×©×× ××§×××Š× 'TAMI' ×©× ×§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ××
×××€×©×š××××ª × ××¡×€××ª, ××§×š ×-https://groups.google.com/d/optout.

--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××××¢× ×× ×××××× ×©××ª× ×× ×× ××§×××Š× 'TAMI' ××§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ×× hasadna+***@googlegroups.com.
××× ××€×š×¡× ××××¢××ª ××§×××Š× ××, ×©×× ×××"× ×-***@googlegroups.com.
×××€×©×š××××ª × ××¡×€××ª ××§×š ×-https://groups.google.com/d/optout.

Udi Finkelstein

2014-10-08 04:53:31 UTC

Permalink

I could contribute a 24V 13A power supply instead, assuming the 10A unit
Gal has is fanless (I need a fanless unit to replace my existing noisy LED
power supply at home).

Post by Udi Finkelstein
Gal, I could really make use of one 24V power supply.
thanks,
Udi
n.b. the digital load (Re:load Pro) I bought for TAMI is on its way in the
royal mail. we'll see how long it takes for it to get to me with all these
mail strikes.

Post by Gal Bazel
Cool,
I will need someone's help with putting everything in place since I don't
really know where every thing goes.

Post by Guy Ovadia
I think it's all very good and useful stuff and I'm in favor that you
bring it in. I'd like to emphasize that in my experience, the key to
bringing stuff to TAMI and making it actually useful is labeling it well
and storing it in appropriate places. because of the distributed nature of
how TAMI works, if this is not done then stuff rapidly transforms from "a
useful item with a specific, known purpose" to "random junk".
mark all the electronics stuff as "working" or something to that effect
(that is, assuming you know they are working). everything which is not
obvious in purpose should be labeled with a few words of description, i.e.
as you did above the photos.
p.s. the ceiling tiles take a lot of space, so I don't suggest bringing
it unless people have an immediate construction project in mind for it.
personally, I think a lot of the charm of the physical space of TAMI is,
well, the space. I don't support installing a second ceiling and lowering
the effective ceiling height even if it will save a bit on a/c.

Post by Gal Bazel
small air valves
which I had taken off some old High-tec machines I had bought a few
years ago.

Post by Ronen Shouker
What are those air units do?

Post by Gal Bazel
Some stuff I have and maybe can be used at TAMI
Please let me know what is needed/wanted
and what not to bring.
Linear rails about 30-40 mm, a bit large for it's length.
I can give 2-3 units.
<https://lh4.googleusercontent.com/-tzwm_5g6oe0/VDSR4ka1QUI/AAAAAAAAAEk/PVmfS8tbySU/s1600/2014-10-01%2B15.55.12.jpg>
DC motor driver
<https://lh6.googleusercontent.com/-02R9Ygl1WoU/VDSR8rDfWTI/AAAAAAAAAEs/eE0FPAoAlRU/s1600/2014-10-01%2B15.55.43.jpg>
Step motor with driver
<https://lh3.googleusercontent.com/-JsIF4roYa3w/VDSSBWhtQOI/AAAAAAAAAE0/Wx3-XBI7xyc/s1600/2014-10-01%2B15.56.34.jpg>
2 cameras, no lenses
<https://lh3.googleusercontent.com/-ixcTuVJttTc/VDSSGAzi7cI/AAAAAAAAAE8/JCUk4dB3QOY/s1600/2014-10-01%2B15.58.27.jpg>
old KVM units, a few units
<https://lh4.googleusercontent.com/-RLPSW20BI5E/VDSSKGGXdKI/AAAAAAAAAFE/lzJ1pjSNsn0/s1600/2014-10-01%2B15.59.03.jpg>
small momvent range linear rails
<https://lh5.googleusercontent.com/-xp6VFzQ6_Jw/VDSSQ22hrvI/AAAAAAAAAFM/gtOODyUr1x8/s1600/2014-10-01%2B15.59.33.jpg>
a few units of 50mm encoder brackets
<https://lh6.googleusercontent.com/-_pDlWabIyEM/VDSSVWGcrkI/AAAAAAAAAFU/mkTLhjT5zMA/s1600/2014-10-01%2B16.00.14.jpg>
ecostic ceiling panels,
about 30-40
can be used for closing a part of the ceiling
at TAMI to lower the AC consumption
<https://lh5.googleusercontent.com/-rcIdwdgMZ8M/VDSSec7DfKI/AAAAAAAAAFk/V1MRwRJMCxk/s1600/2014-10-01%2B16.01.33.jpg>
an on wall work staition
with room for a small keyboard, mouse pad and a monitor.
all the cables are going in the panels.
<https://lh5.googleusercontent.com/-4csdor0aVX8/VDSSiIoQKNI/AAAAAAAAAFs/dCG7PzDBYcE/s1600/2014-10-01%2B16.05.36.jpg>
24V - 10 Amp power supply.
may be more then one in the future.
<https://lh5.googleusercontent.com/-jh4crWc4sYA/VDSSZ3mZw7I/AAAAAAAAAFc/Qu1t13KJdzs/s1600/2014-10-01%2B16.00.43.jpg>
some small air units
<https://lh6.googleusercontent.com/-CK4fdueeXRQ/VDSR033W64I/AAAAAAAAAEc/4HXTRYHV9-A/s1600/2014-10-01%2B15.54.38.jpg>
I really don't know how these are called but I have a few units
that I don't have, and reciving more all the time.
8mm thickness with 8mm holes.
<https://lh4.googleusercontent.com/-Nde67gV9Zj4/VDSRwqbp25I/AAAAAAAAAEU/yr46K10CYjY/s1600/2014-10-01%2B15.53.57.jpg>
2 sets of shelves
<https://lh3.googleusercontent.com/-MXI26YPE4JE/VDSRrhP4uOI/AAAAAAAAAEM/5QK71C8nByU/s1600/2014-10-01%2B15.52.45.jpg>
--
archive and web access >https://groups.google.com/for
um/#!forum/hasadna
---
â×§××××ª ××ª ×××××¢× ××× ××€× × ×©××ª× ×š×©×× ××§×××Š× 'TAMI' ×©× ×§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ××
×××€×©×š××××ª × ××¡×€××ª, ××§×š ×-https://groups.google.com/d/optout.

Gal Bazel

2014-10-08 06:31:57 UTC

Permalink

The 10amp is also faned.
if you want I have a few unit in stock,
I can loan you one for testing it and checking the noise it makes.

I will also check to see if I have fanless unit that I can spare.

--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
‏קיבלת הודעה זו מכיוון שאתה מנוי לקבוצה 'TAMI' בקבוצות Google.
כדי לבטל את הרישום לקבוצה הזו ולהפסיק לקבל ממנה דוא"ל, שלח דוא"ל אל hasadna+***@googlegroups.com.
כדי לפרסם הודעות בקבוצה זו, שלח דוא"ל ל-***@googlegroups.com.
לאפשרויות נוספות בקר ב-h

Udi Finkelstein

2014-10-08 07:05:35 UTC

Permalink

I bought one 10A fanless in eBay and is OK. it's driving the led strip in
my hall. I needed another one for the living room but if yours is also
fanned, I'll pass, and buy another one at eBay.

Post by Gal Bazel
The 10amp is also faned.
if you want I have a few unit in stock,
I can loan you one for testing it and checking the noise it makes.
I will also check to see if I have fanless unit that I can spare.
--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××××¢× ×× ×××××× ×©××ª× ×× ×× ××§×××Š× 'TAMI' ××§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ××
×××€×©×š××××ª × ××¡×€××ª ××§×š ×-https://groups.google.com/d/optout.

--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××××¢× ×× ×××××× ×©××ª× ×× ×× ××§×××Š× 'TAMI' ××§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ×× hasadna+***@googlegroups.com.
××× ××€×š×¡× ××××¢××ª ××§×××Š× ××, ×©×× ×××"× ×-***@googlegroups.com.
×××€×©×š××××ª × ××¡×€××ª ××§×š ×-https://groups.google.com/d/optout.

Alon Levy

2014-10-08 07:49:44 UTC

Permalink

On 10/08/2014 04:42 AM, Gal Bazel wrote:

I would be interested in the working station. I still want someday to
have a walking station (without paying 6000 nis) and this could come in
handy, plus I'd install it somewhere meanwhile.

Post by Gal Bazel
Some stuff I have and maybe can be used at TAMI
Please let me know what is needed/wanted
and what not to bring.
Linear rails about 30-40 mm, a bit large for it's length.
I can give 2-3 units.
<https://lh4.googleusercontent.com/-tzwm_5g6oe0/VDSR4ka1QUI/AAAAAAAAAEk/PVmfS8tbySU/s1600/2014-10-01%2B15.55.12.jpg>
DC motor driver
<https://lh6.googleusercontent.com/-02R9Ygl1WoU/VDSR8rDfWTI/AAAAAAAAAEs/eE0FPAoAlRU/s1600/2014-10-01%2B15.55.43.jpg>
Step motor with driver
<https://lh3.googleusercontent.com/-JsIF4roYa3w/VDSSBWhtQOI/AAAAAAAAAE0/Wx3-XBI7xyc/s1600/2014-10-01%2B15.56.34.jpg>
2 cameras, no lenses
<https://lh3.googleusercontent.com/-ixcTuVJttTc/VDSSGAzi7cI/AAAAAAAAAE8/JCUk4dB3QOY/s1600/2014-10-01%2B15.58.27.jpg>
old KVM units, a few units
<https://lh4.googleusercontent.com/-RLPSW20BI5E/VDSSKGGXdKI/AAAAAAAAAFE/lzJ1pjSNsn0/s1600/2014-10-01%2B15.59.03.jpg>
small momvent range linear rails
<https://lh5.googleusercontent.com/-xp6VFzQ6_Jw/VDSSQ22hrvI/AAAAAAAAAFM/gtOODyUr1x8/s1600/2014-10-01%2B15.59.33.jpg>
a few units of 50mm encoder brackets
<https://lh6.googleusercontent.com/-_pDlWabIyEM/VDSSVWGcrkI/AAAAAAAAAFU/mkTLhjT5zMA/s1600/2014-10-01%2B16.00.14.jpg>
ecostic ceiling panels,
about 30-40
can be used for closing a part of the ceiling
at TAMI to lower the AC consumption
<https://lh5.googleusercontent.com/-rcIdwdgMZ8M/VDSSec7DfKI/AAAAAAAAAFk/V1MRwRJMCxk/s1600/2014-10-01%2B16.01.33.jpg>
an on wall work staition
with room for a small keyboard, mouse pad and a monitor.
all the cables are going in the panels.
<https://lh5.googleusercontent.com/-4csdor0aVX8/VDSSiIoQKNI/AAAAAAAAAFs/dCG7PzDBYcE/s1600/2014-10-01%2B16.05.36.jpg>
24V - 10 Amp power supply.
may be more then one in the future.
<https://lh5.googleusercontent.com/-jh4crWc4sYA/VDSSZ3mZw7I/AAAAAAAAAFc/Qu1t13KJdzs/s1600/2014-10-01%2B16.00.43.jpg>
some small air units
<https://lh6.googleusercontent.com/-CK4fdueeXRQ/VDSR033W64I/AAAAAAAAAEc/4HXTRYHV9-A/s1600/2014-10-01%2B15.54.38.jpg>
I really don't know how these are called but I have a few units
that I don't have, and reciving more all the time.
8mm thickness with 8mm holes.
<https://lh4.googleusercontent.com/-Nde67gV9Zj4/VDSRwqbp25I/AAAAAAAAAEU/yr46K10CYjY/s1600/2014-10-01%2B15.53.57.jpg>
2 sets of shelves
<https://lh3.googleusercontent.com/-MXI26YPE4JE/VDSRrhP4uOI/AAAAAAAAAEM/5QK71C8nByU/s1600/2014-10-01%2B15.52.45.jpg>
--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
‏קיבלת את ההודעה הזו מפני שאתה רשום לקבוצה 'TAMI' של קבוצות Google.
כדי לבטל את הרישום לקבוצה הזו ולהפסיק לקבל ממנה דוא"ל, שלח דוא"ל אל
לאפשרויות נוספות, בקר ב-https://groups.google.com/d/optout.

--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
‏קיבלת הודעה זו מכיוון שאתה מנוי לקבוצה 'TAMI' בקבוצות Google.
כדי לבטל את הרישום לקבוצה הזו ולהפסיק לקבל ממנה דוא"ל, שלח דוא"ל אל hasadna+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
כדי לפרסם הודעות בקבוצה זו, שלח דוא"ל ל-hasadna-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
לאפשרויות נוספות בקר ב-https://groups.google.com/d/optout.

Gal Bazel

2014-10-08 08:05:12 UTC

Permalink

A walking station ?
be sure that this unit is heavy, it is made of stainless steel.

Alon Levy

2014-10-08 09:56:17 UTC

Permalink

Post by Gal Bazel
A walking station ?
be sure that this unit is heavy, it is made of stainless steel.

This unit would be stationary. The walking station is a stepper set to
~1-2 KM/h and above it at working height a desk, like the one you are
bringing. Weight is irrelevant.

kfir bar-am

2014-10-08 22:25:43 UTC

Permalink

The things look great. +100
And +10for what guy said.

Gal Bazel

2014-10-11 10:49:37 UTC

Permalink

I had brought the stuff a few days ago and had no time to update :

The CNC cabinet is in the CNC room, on the floor next to the CNC.
on it there is a box with some of the stuff I did not knew where to put
(And I am sorry but did not labeled it)
in the box there are linear rails,
the KVM unit,
the 8mm units
the two cameras,
The shelves hands,
the Encoder brackets
and a plug for the CNC machine.
next to the box there are rails for the shelves

I had put the 24V power supply on the shelf with all of the PC Power supply.
The SERVO and STEPPER units I had labeld as "took out of working systems"
and put them in the STEPPER and SERVO drawers close to the stairs to the
second floor.

Someone please arrange the rest of the parts that I had left in the
box in the correct shelves

ALON - I had left the working station on the floor next to the shelves
where all of the computer parts are.

--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××××¢× ×× ×××××× ×©××ª× ×× ×× ××§×××Š× 'TAMI' ××§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ×× hasadna+***@googlegroups.com.
××× ××€×š×¡× ××××¢××ª ××§×××Š× ××, ×©×× ×××"× ×-***@googlegroups.com.
×××€×©×š××××ª × ××¡×€××ª ××§×š ×-https://groups.google.com/d/optout.

Moty Marcos Dorfman

2014-10-11 11:37:26 UTC

Permalink

awesome i will make use of the linear rails :)

Post by Gal Bazel
The CNC cabinet is in the CNC room, on the floor next to the CNC.
on it there is a box with some of the stuff I did not knew where to put
(And I am sorry but did not labeled it)
in the box there are linear rails,
the KVM unit,
the 8mm units
the two cameras,
The shelves hands,
the Encoder brackets
and a plug for the CNC machine.
next to the box there are rails for the shelves
I had put the 24V power supply on the shelf with all of the PC Power supply.
The SERVO and STEPPER units I had labeld as "took out of working systems"
and put them in the STEPPER and SERVO drawers close to the stairs to the
second floor.
Someone please arrange the rest of the parts that I had left in the
box in the correct shelves
ALON - I had left the working station on the floor next to the shelves
where all of the computer parts are.
--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××ª ×××××¢× ××× ××€× × ×©××ª× ×š×©×× ××§×××Š× 'TAMI' ×©× ×§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ××
×××€×©×š××××ª × ××¡×€××ª, ××§×š ×-https://groups.google.com/d/optout.

--
archive and web access >https://groups.google.com/forum/#!forum/hasadna
---
â×§××××ª ××××¢× ×× ×××××× ×©××ª× ×× ×× ××§×××Š× 'TAMI' ××§×××Š××ª Google.
××× ×××× ××ª ××š××©×× ××§×××Š× ××× ××××€×¡××§ ××§×× ××× × ×××"×, ×©×× ×××"× ×× hasadna+***@googlegroups.com.
××× ××€×š×¡× ××××¢××ª ××§×××Š× ××, ×©×× ×××"× ×-***@googlegroups.com.
×××€×©×š××××ª × ××¡×€××ª ××§×š ×-https://groups.google.com/d/optout.